I drilled my NUCLEAR CELL 35 x 4 x 55. This puts the pin in the ring finger and the MB on my midplane. I touched up the surface with a 1000 CTD pad then lightly hit it with a 3000 CTD over it. I drilled the NUCLEAR CELL with the same layout as a HYPER CELL FUSED that I drilled to take to 2019 USBC Nationals. The HYPER CELL FUSED ended up being a go to ball for me on longer patterns when I need control with earlier read. The NUCLEAR CELL is as close to this as I can get except with just slightly more push thru the fronts. I have also thrown the NUCLEAR CELL as a ball down option to my GRAVITY EVOLVE when I felt that more push thru the front was needed and I felt they were too cliffed for my OMEGA CRUX. I am going to drill a 2nd NUCLEAR CELL with a more pin-up in the range of 5" and the MB at about 75* to use when I feel there is more of a blend that needs push up front.